Press and hold the "MODE" button for 3 seconds to enter setup mode-Use the UP or DOWN buttons to adjust the number of hours-Press the MODE button again to set the minute by using the UP or DOWN button- Press the MODE button again to exit the setup mode.
Step1.Press the "MODE" key. Once the AL icon starts to blink, alarm setting can be started.
Step2.Press and hold the MODE button for 3 seconds-Then use the UP or DOWN bottom to set the desired value in the order of hours, minutes, and snooze interval (Press MODE to switch from one parameter setting process to the next one). Snooze intervals can be adjusted from 5 to 60 minutes (the default interval is 5 minutes).
Step3.Press MODE again to exit the setup mode.
Step4.Press DOWN to ensure that the AL lamp is at the long bright stage, and the alarm set up is finished.(Note: if the AL lamp is not at the long bright stage, the alarm set up is not successful.)
Press MODE twice, then press UP or DOWN bottom to turn on/off the night mode
The default night mode is between 18:00 and 6:00
Function: Time Display/Alarm/Snooze
Time Display: 12 or 24 hour format selectable
Brightness: 3 Steps Dimmer Control (High, Medium, Low)
Snooze: 5 - 60 minutes (The default interval time is 5 minutes)
Powered by: USB (1 meter USB cord included)
Settings Back Up : 1 Pcs CR2025 battery (included)
Product Size: 21.5 cm x 8.8 cm x 3.7 cm (8.4" x 3.3" x 1.4")
1 x Digital Alarm Clock
1 x USB Cable
1 X User Manual
3D Digital Alarm Clock VSOAIR LED Wall Clock Large Desktop Alarm Clock 3 Adjustable Brightness Levels (Black/Red) - B0753GQF98